|
For quick and easy installation or removal. Provides precision control of concentricity.
Type CF and CSF Rotary Joints are identical to Type C and CS but offer flange mounting
for use where this is desirable or necessary. Important advantages of flange mounting
are that installation is simple and quick, and the concentricity and alignment are
accurately controlled. Standard CF joints are furnished with mounting flanges, split ring
(two halves), key and soft metal ring gasket.
Sizes: 1", 1-1/2", 2", 2-1/2", 3"
Operating temperatures as high as 406°F (208°C), pressures up to 250 psi (17.5 Kg/cm2)
hydraulics. No lubrication required.
Joint
Size |
Type CF
Basic Ass'y No. |
Type CSF
Basic Ass'y No. |
Joint
Trim |
Working Pressure
(psi) |
Pipe Threads* |
|
Cold |
Saturated
Steam |
A&B |
C |
D
Siphon Thd.
Integral |
D
Siphon Thd.
w /Bush.† |
AA
Pipe ID |
|
1" |
BC54000 |
BC54100 |
Ferrous |
500 |
250 |
1" |
1/2" |
3/8" |
1/4" |
1.00
.94 |
|
BC54065 |
BC54165 |
Bronze |
300 |
125 |
|
1-1/2" |
BC54000 |
BC54100 |
Ferrous |
500 |
250 |
1-1/2" |
3/4" |
3/4" |
1/2" |
1.50
1.44 |
|
BC54065 |
BC54165 |
Bronze |
300 |
125 |
|
2" |
BC54000 |
BC54100 |
Ferrous |
400 |
225 |
2" |
1-1/4" |
3/4" |
1/2" |
1.88 |
|
BC54065 |
BC54165 |
Bronze |
300 |
125 |
|
2-1/2" |
BC54000 |
BC54100 |
Ferrous |
400 |
225 |
2-1/2" |
1-1/4" |
1" |
3/4" |
2.38
2.19 |
|
BC54065 |
BC54165 |
Bronze |
300 |
125 |
|
3" |
BC54000 |
BC54100 |
Ferrous |
400 |
225 |
3" |
1-1/2" |
1 1/2" |
1" |
2.88 |
|
BC54065 |
BC54165 |
Bronze |
300 |
125 |
Joint
Size |
E |
G |
H |
J |
K |
L(CF) L(CFS) |
M |
N |
P |
Q
Hole
Size |
Torque
Rod
OD
max |
R |
S
Conn |
T |
X |
Weight
lbs |
|
1" |
3.62 |
5.67
6.42 |
2.06 |
1.78
2.54 |
4.92
5.67 |
6.73 5.97
7.48 6.72 |
3.88 |
1.25 |
1.96 |
.50 |
.38 |
5.36
6.11 |
1/2 |
2.31 |
.25 |
9 |
|
1-1/2" |
4.75 |
7.88 |
2.44 |
2.57 |
7.44 |
9.44
8.94 |
4.88 |
2.06 |
2.56 |
.62 |
.50 |
7.38 |
3/4 |
3.00 |
.25 |
19 |
|
2" |
6.00 |
9.09 |
2.75 |
2.73 |
8.53 |
11.09 |
5.50 |
2.56 |
2.75 |
.62 |
.50 |
8.66 |
1-1/4 |
2.75 |
.31 |
31 |
|
2-1/2" |
6.75 |
9.75 |
3.00 |
2.59 |
9.35 |
12.06 |
5.88 |
2.50 |
3.35 |
.75 |
.62 |
9.17 |
1-1/4 |
3.06 |
.25 |
40 |
|
3" |
7.88 |
10.35 |
3.62 |
2.62 |
10.16 |
12.53 |
6.50 |
2.88 |
3.50 |
.94 |
.75 |
9.84 |
1-1/2 |
3.62 |
.25 |
50 |
For Siphon Use ...
† All joints equipped for use with siphon pipe are furnished with "D" connection for large size siphon - a bushing is shipped with each joint, 1" through 3" sizes for reducing the "D" connection for small size siphon if required. Installation instructions are included with each bushing. Siphon pipes are not included.
|
* Journal flanges not furnished.
|
Mounting Flange Data
Joint
Size |
Stud Data |
Y
+ .003
-.000 |
Bolt Circle |
Size |
Length |
Reg. |
| 1 |
2-3/4 |
1/2 - 13 |
2-1/2 |
4 |
1.406 |
| 1-1/2 |
3-5/8 |
5/8 - 11 |
2-1/2 |
4 |
2.096 |
| 2 |
4-1/4 |
5/8 - 11 |
2-1/2 |
4 |
2.721 |
| 2-1/2 |
4-5/8 |
5/8 - 11 |
2-1/2 |
4 |
3.096 |
| 3 |
5-1/4 |
5/8 - 11 |
2-1/2 |
4 |
3.721 |
| When Ordering Journal Flanges † |
|
Flange Dimension |
Bolt Hole Data |
| U |
B.C. |
| V |
Size |
| W |
No. req. |
| Z |
|
Bronze Trim Construction
Bronze sleeve and end cap, with iron casting for water, brine, and low pressure steam are available.
Ferrous Trim Construction
Recommended for higher pressure steam to 250 psi (17.5 Kg/cm2) and hot oil service.
Ordering Journal Flanges
Journal flanges may be ordered separately to specifications or furnished by the customer. Flange styles 2 or 3 with custom-machined "Pilot Diameters" are recommended for best concentricity control. The customer will normally furnish studs, nuts and lockwashers for mounting flange, socket head bolts for the journal flange and the gasket between flange and journal. If the journal flange is purchased from BARCO, studs, nuts and lockwashers for the mounting flange to journal flange assembly are furnished.
Preventive Maintenance
By measuring dimension 'X' ( from step on sleeve to end of cap) and referring to the dimension table, visual inspection periodically can determine when seals should be replaced.
How to Order | Printable version of this page (160k PDF file)
|
